Edge Trim 3.5mtr

Available in Black or White

65mm Depth

Approx 30mm width on the edge 

 Designed with its own water-check kerb to be used around the perimeter of a flat roof to direct water towards the gutter edge.

Extruded using virgin plastic ensuring colour fast, non brittle, identical profiles. Manufactured BSI Quality assured  to 99.9% accuracy.

Permaroof Bond & Seal or Permaroof Closed Cell Foam Tape must be used to form a seal between the Trim and the EPDM.

Polypins are used to fix the trim into the Fascia Board.

Corner pieces and End caps are used to finish any open edges, these are injection moulded using state of the art manufacturing technology.

£12.00

Please select product options before adding to cart

 

Item has been added to your cart!

 
Loading

End caps

Edge Trim End Caps

Available in Black or White

These end caps are used for capping off the ends of the trim where they join each other or about an upstand.

Sold separately


£0.55

Please select product options before adding to cart

 

Item has been added to your cart!

 
Loading

External Corners

External Corner

90 Degree external corner

This is an Injection moulded corner piece available in Black or White, used on a 90 degree bend and also when an Edge Trim meets a Gutter Trim. It can be installed using Permaroof Bond & Seal or with Polypins, either way it provides a very neat, professional touch.


£1.40

Please select product options before adding to cart

 

Item has been added to your cart!

 
Loading

Gutter trim 2.5mtr

Available in Black or White

Size 2.5m / Back Plate Dimensions – 75mm Depth, 20mm width (approx)

 A unique and patented design. Used along the Gutter edge. It sandwiches the EPDM roofing membrane eliminating penetration when fixing. It is a 2 part trim sold together and comes in 2.5m lengths.

APPLICATION

The Gutter back plate must be installed prior to the membrane, the top of the plate must be flush with the deck. The EPDM will overhang approx 50mm , the front plate is then pushed under the hook of the back plate with the membrane between the two, this will then clip into place to form a smooth finish.

Extruded using virgin plastic ensuring colour fast, non brittle, identical profiles. Manufactured BSI Quality assured  to 99.9% accuracy.


£12.00

Please select product options before adding to cart

 

Item has been added to your cart!

 
Loading

Internal Corners

Internal Corner

90 Degree Internal corner

This is an Injection moulded corner piece available in Black or White, used on a 90 degree Internal bend and also when an Edge Trim meets a Gutter Trim(as shown above). It can be installed using Permaroof Bond & Sealor with Polypins, either way it provides a very neat, professional touch.


£1.40

Please select product options before adding to cart

 

Item has been added to your cart!

 
Loading

Joint Clip

Joint Clip

Available in Black or White

40mm Width

This clip is used for joining two pieces of Permaroof Edge Trim together. It is moulded to the same shape as the Edge Trim and requires no fixings.


£1.20

Please select product options before adding to cart

 

Item has been added to your cart!

 
Loading